Basic Info.
Testing Equipment Type
Wireless
Certification
CE, ISO, RoHS
Support Tire Number
1 to 46
Function
Tire Pressure and Temperature Measurement
Development
RS232, Connect with GPS Tracker
Working Voltage
DC9V to DC36V for Monitor and Repeater
Pressure Range
0 to 1400kpa
Working Temperature
-40ºC to 125 ºC
Sensor Battery Life
up 1year for External Sensor
External Sensor Weight
9.5g
Product Description
big screen support 1 to 46 wheel RS232 wireless tire pressure monitoring system truck bus trailer tpms
QA:
What is the meaning of PHOTOELECTRIC sensor? For PHOTOELECTRIC sensor, it's mean that the backlight brightness is automatically adjusted by the sensor Warning status:It is mentioned in the instruction:High pressure/low pressure…warning Receiver …will display,warning sound will remind and LED red indicate light will blink. Press key canturn off warning sound, but LED red indicate light still blink until all tires'Actually both, sound and LEW indicates for couple seconds only (see video 2). Why? this is my firmware set it from last year, but our menu don't change it.the LED and buzz will work when display only get warning signal the buzz will cancel when we click "Return" button, but the led will continue blink when display get warning signals- Settings:
- You have send me sensors, that have been paired with monitor already (13 pcs). So I can immediately install all sensors at once to the wheels according with its numbers/position, turn on the monitor and system should works in couple of minutes, is it right?
---->`Sorry, I can not sure if it was paired, but you can verify it with a handheld device. turn on display, then wake up any sensor, if the display is warning, it's mean be paired, but if haven't, please set the tire position then pair all sensor to display again How did you write sensor's ID to the monitor?Long press "Model" button, then goes into P1, then Click "SET", will goes into P2, then Click "OK", then Click "OK", The FL tire will go into the status of ID learning waiting, then wake up the firs sensor. please check the video1But if you had installed all sensor to tire, please use the wake up tool near the position of sensor, I suggest you do it in officeHow to set the tire position, please check the video2 please set the position, then operate id learning - If there is no any sensor in monitor memory, may I install all the sensors at once, and only after that turn on and proceed monitor settings?
I suggest you register all sensor to display in office at first, then install sensor again, it's easy in office via wake up tool, but if you had installed, you can operate id learn againHow can I do presetting (pair sensor and monitor) in advance by myself?----> please check the video1 and 2 - To make pressings in advance (to pair sensor and monitor before installation to wheel how can I find out sensor ID number?
1, Read the id by wake up tool 2, goes into P2, before the interface"-----", you can find the id, 3, by rs232 port at first, you can send the command: 55 aa 0a 15 00 00 00 00 00 E0 display will feedback: 55 aa 0a 15 00 00 00 00 00 E0 then will send all sensor's ID: 55 aa 0a 15 Tire toal number tire number ID1 ID2 ID3 CSUM please check the protocol of td18, only TD18 has the funtion, TD21 and TD20 hasn't the check id fuctionAt Protocol description it is mentioned: "The host computer(or GPS) … can write sensor ID in the monitor via the command (not applicable to the trailer). Of course, you need to know in advance the sensor ID number, you can know the id via TPMS tool(LF wake up tool, if you need, you can buy it from factory)"Does that I can read sensor's ID, assign wheel number and write sensor's ID to the monitor in advance using PC? -----> yes, you can read the id via wake up tool at first, then write the id to td18 display. PC send: 55 aa 0a 14 Tire position(0x01-0x2e) ID1 ID2 ID3 00 CSUM If it is succesful, will feedback : 55 aa 0a 14 00 00 00 00 00 e1- When does sensor wake up without hand tool? Under air pressure (what is minimum?) or when tire starts rotation?
if you haven't the tool have to do it like this: A, external sensor: when the display is in the status of id learning wait, you can remove or install the sensor again from valve B, internal sensor: when the display is in the status of id learning wait, you can inflate or deflate the tire continuously, and keeping 6 to 10s 7). how to use trailer exchanger in td18? A. if you use trailer exchange function in td18, please save the id of tralier sensor to RP05. The first, learn truck sensor ID in display from 1 to 6 or 1 to 10 in P2 Second, goes into P6, click OK, then give power to rp05, RP05 ID will be saved in td18, then power off for td18 The Third, Power on td18, repeater on will flashing, then click OK, so td18 will connect with rp05 The fourth, goes into P2, Click set to the first trailer tire, then Click OK, then wake up sensor by tool, the first sensor id will be learnd into rp05B. but please set the tire position in P1 before you learn sensor ID to RP058).For TPMS product do you already have experience in Mining fleet such as Komatsu HD785-7?, can you share the data if available? ----> yes, we have. we ever install my tpms is Mengulia mining fleet, use 6pcs t03w sensor +1pcs Repeater+1pc display in 1pcs truck. 9). I see in your manual instruction the external sensor (Valve Cap) is T04W while the one you send us is T03W, is the installation the same?----> yes, the method of T04W installation is same to T03W, But t04w is suitable 8v1 valve, and will use a screw to fix the sensor in valve. But t03w hasn't the screw Data Factory Default Setting
| Item | Setting |
| Unit | Bar |
| High pressure warning data | 12 Bar |
| Low pressure warning data | 6 Bar |
| Temperature unit | ºC |
| High temperature warning data | 85 ºC |
| Item | Instruction |
| Psi | Pressure unit: pounds per square inch |
| Bar | Pressure unit:bar |
| ºC | Temperature unit: degrees Celsius |
| ºF | Temperature unit: degrees Fahrenheit |
| Pressure unit conversion | 1Bar=100Kpa≈14.5Psi |
| Temperature unit conversion | 1ºC=33.8ºF |
Product Technical Parameters
- Monitor
| NO. | Item | Technical Parameters |
| 1 | Working Voltage | DC 12V~DC 32V |
| 2 | Working Current | <10 mA |
| 3 | RF Signal Receiving Sensitivity: | <-105 dbm |
| 4 | Working Temperature | -40ºC ~ 85ºC |
| 5 | RF Transmit Signal Modulation Method: | FSK |
| 6 | Working Frequency: | 433.92MHz±30KHZ |
II, Repeater
| No. | Item | Technical Parameters |
| 1 | Working Voltage: | DC 12V~DC 32V |
| 2 | Working Frequency: | 433.92 MHz±30KHZ |
| 3 | RF Transmit Signal Modulation Method: | FSK |
| 4 | RF Signal Transmission Power: | < 10 dbm |
| 5 | RF Signal Receiving Sensitivity: | <-105 dbm |
| 6 | Working Temperature: | -40ºC ~ 85ºC |
III, Internal Sensor
| No. | Item | Technical Parameters |
| 1 | Sensor battery model no.: | CR2450(550mAh) |
| 2 | Quiescent Current | <0.7uA |
| 3 | Working Temperature | -40ºC~125ºC |
| 4 | Storage Temperature | -40ºC~125ºC(store in normal temperature) |
| 5 | Transmission current | <10mA |
| 6 | Sensor battery lifespan | More than 5 years |
| 7 | RF Transmit Signal Modulation Method: | FSK |
| 8 | Working Frequency: | 433.92 MHz±30KHZ |
External Sensor(T02W)
| No. | Item | Technical Parameters |
| 1 | Sensor battery | CR1632(140mAh) |
| 2 | Suitable | 8v1 valve, bus or truck |
| 3 | Quiescent Current | <0.7uA |
| 4 | Working Temperature | -20ºC~85ºC |
| 5 | Storage Temperature | -40ºC~125ºC(store in normal temperature) |
| 6 | Transmission current | <10mA |
| 7 | Sensor battery lifespan | More than 1 years(Battery can be replaced |
| 8 | RF Transmit Signal Modulation Method: | FSK |
| 9 | Working Frequency: | 433.92 MHz±30KHZ |
| 10 | Weight | 10g±0.5g |
External Sensor(T03W)
| No. | Item | Technical Parameters |
| 1 | Sensor battery | CR1632(140mAh) |
| 2 | Suitable | 12v1 valve, otr truck, Mining truck |
| 3 | Quiescent Current | <0.7uA |
| 4 | Working Temperature | -20ºC~85ºC |
| 5 | Storage Temperature | -40ºC~125ºC(store in normal temperature) |
| 6 | Transmission current | <10mA |
| 7 | Sensor battery lifespan | More than 1 years(Battery can be replaced |
| 8 | RF Transmit Signal Modulation Method: | FSK |
| 9 | Working Frequency: | 433.92 MHz±30KHZ
|
| 10 | Weight | 12g±0.5g |
External Sensor(T04W)
| No. | Item | Technical Parameters |
| 1 | Sensor battery | CR2050(330mAh) |
| 2 | Suitable | 8v1 valve, bus or truck |
| 3 | Quiescent Current | <0.7uA |
| 4 | Working Temperature | -40ºC~125ºC |
| 5 | Storage Temperature | -40ºC~125ºC(store in normal temperature) |
| 6 | Transmission current | <10mA |
| 7 | Sensor battery lifespan | More than 5years(Battery cann't be replaced |
| 8 | RF Transmit Signal Modulation Method: | FSK |
| 9 | Working Frequency: | 433.92 MHz±30KHZ |
| 10 | Weight | 11g±0.5g |
Address:
Room 307, Building 2, Taixin Road No. 107, Wanjiang Street, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Consumer Electronics, Electrical & Electronics, Instruments & Meters, Manufacturing & Processing Machinery, Security & Protection, Service, Tools & Hardware, Transportation
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI, BRC, SA 8000, QHSE, HACCP, BS 25999-2, ISO 13485, EICC, ANSI/ESD, SEDEX, ISO 22000, AIB, WRAP, GAP, ASME, ISO 29001, BREEAM, HQE, SHE Audits, IFS, QSR, ISO 50001, LEED, PAS 28000, FSC, ISO 10012, ISO 17025
Company Introduction:
Dongguan Jiuan Electronic Technology Co., Ltd, is a new high-tech enterprise which specializes in developing, producing and marketing TPMS products for more than 13 years. At present, we have launched tens of products into market, covered almost every vehicle types and satisfied for different markets. And with Tiremagic Brand and Jiuan brand in China.
JiuanTPMS have offered its products to many automakers for passenger car, commercial vehicle, bus, truck engineering van in domestic and overseas market as well as developed special products as customers′ request.
Smart Tire, Smart life is our goal, We will give the most effort to the TPMS products, for support best quality, best technical for all customers in future.
){kind=link}